Working away at the turret now and first up I filled some areas that had small recesses , these should be flush or almost so with the rest of the sides with plastic strip. This was then sanded down flush. Next I added some strip to the edges of the bin lids and again sanded them down. This helps hide a slight flaw on the commanders side and also tidies the edges up nicely.
Once that was done I added a very slight raised area to the previous filled sections using tape as an edge then heavily thinned Mr surfacer. The gunner's primary sight has had some work with more to do & I made up a flashing beacon using an accurate armour one. The loaders hatch has had new locking handles added from spare etch & the barrel is all made up and a bit of extra detail added.
No comments:
Post a Comment