Today's progress now and I started by making up some fence posts using scrap etch from the spares box. I drilled holes for the wire then bent the posts to shape. They were then fixed to the base using epoxy glue for a firm bond and the wire was then fixed in place using fine gauge wire. I did try to add a length of barbed wire to the top run but just could not get the tension correct. After that the culvert pipe was hollowed out and the base given a coat of primer. Once that had dried I sprayed tamiya XF52 flat earth over the base then picked out the brickwork with tamiya XF9 hull red. I then started painting the fence and selected bricks and stones in various vallejo tones. Finally the pointing between the bricks was picked out using heavily thinned vallejo german beige.
No comments:
Post a Comment